CDA hg6120 Specifiche Scaricare il pdf (Pagina 18)

How to Install the Hob

How to install the hob:

Overall dimensions of the hob: Width: 580mm Depth: 500mm

Worktop cut-out dimensions: Width: 557mm Depth: 477mm

1. Make the required hole in the worktop. Note that before doing this,

check the instructions supplied with any cooker hood to ensure that

you will have the required clearance. The cut-out (Fig. 8) shows a

61.5mm gap from the wall to the cut-out edge. The distance for

the hob, when ﬁtted, to the back wall is 50mm.

2. Position the hob seal, as shown in the diagram below (Fig. 10), ensur-

ing that the ends meet without overlapping. Do not use silicone type

sealant.

3. Secure the hob to the worktop using the ﬁxing brackets and screws

supplied, as shown in the following diagram (Fig. 11). Remove any

excess sealant after tightening the brackets.

1 2 ... 13 14 15 16 17 18 19 20

Nessun commento

CDA hg6120 Specifiche Pagina 18