CDA RC 9000 Users operating instructions Istruzioni per gli Interventi Scaricare il pdf (Pagina 23)

TECHNISONIC INDUSTRIES LIMITED

TDFM-9000 Installation Instructions TiL 11RE442 Rev. B Issue 5

2-14

RESULTS

If the installed system passes all of the applicable EMI tests, then no further action is

required. If interference is observed, then the interference must be assessed against the

appropriate standards of airworthiness for the system in question. For example, it is

permissible for a VFR certified GPS to lose navigation capability while the TDFM-9000

unit is transmitting, providing that it recovers properly and promptly, but it is not

permissible for an IFR Approach certified GPS to be affected in the same way. A

complete discussion of all the standards of airworthiness to be applied in assessing EMI

effects is beyond the scope of this document.

PROCEDURE

A. Operate the TDFM-9000 transmitter on the following frequency for at least 20 seconds.

Observe the GPS for any degradation in satellite status or availability or flags.

FREQUENCIES GPS #1 GPS #2

TDFM-9000 PASS FAIL PASS FAIL

143.2125 MHz

143.2250 MHz

157.5375 MHz

157.5500 MHz

512.0000 MHz

NOTES:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Nessun commento

CDA RC 9000 Users operating instructions Istruzioni per gli Interventi Pagina 23